Inner Race Hub Saver - 71310

Manufacturer - Steck Manufacturing

Features and Benefits:?ÇóA 6 inch steel cone with an integrated bearing in its nesting base.?ÇóAllows the technician to place the hub on the tip of the cone and rotate while applying heat.?ÇóThe heat will raise the temperature of the inner bearing race evenly and quickly causing the race to expand and release from the hub.?ÇóAllows the technician to remove the race from the hub in about 5 minutesSteck?ÇÖs new Inner Race Hub Saver is a 6?Ç¥ steel cone cylinder with an integrated bearing in its base nesting in an 6x6?Ç¥ heavy base to allow a technician to place the hub on the tip of the cone to rotate the hub with one hand while applying heat from an oxyacetylene torch. While rotating the hub the oxyacetylene torch will raise the temperature of the inner bearing race evenly and quickly a few hundred degrees causing the race to expand and release from the hub due to its tight tolerance. This allows the technician to remove the race from the hub in about 5 minutes.The Inner Race Hub Saver allows the technician to easily remove the interference fit instead of trying use a grinder and or chisels to break hardened steel as well as using bearing splitters under extremely high pressure. Unbolt or press out the wheel hub and bearing assembly from the knuckle on the suspension arm of most (many late and older model) Toyota, Honda, Ford, Acura, Mazda, and some Subaru, VW, Audi, and BMW applications Clean spindle both before and after interference fit removal with emery cloth and remove grease with brake cleaner or solvent. Assemble Inner Race Hub Saver steel cone into base and place hub on top of cone. Place CLEAN hub and inner race assembly on assembled cone and base. Put on proper PPE, such as goggles, gloves, etc. to light the oxyacetylene torch. While slowly rotating hub hold the torch at a 45-degree angle, concentrating heat in the center of the bearing race for approximately a minute or until it slides onto the cone. If bearing does not release from the hub within 2 minutes, let assembly cool down to room temperature and repeat starting at step 2. Turn off the torch and invert the Inner Race Hub Cone to remove the interference fit before it cools.

Warranty - Repair only up to 90 days

UPC - 717290004686

Category of Tools - Vehicle Specialty Tools, Driveshaft and Axle

RETURN POLICY
When exchanging or returning of an item, it must be accompanied by receipt and in its original packaging. Sale and regular priced merchandise can be exchanged or refunded within 30 days of receipt. Return shipping fees will apply. We reserves the right to refuse returns or exchanges of items that are not in as-new condition due to damage or misuse by the customer.

25% restocking fee will be charged on all returns. Delivery fees and oversize fees are non-refundable.

NON - RETURNABLE ITEMS

• Gift Cards can not be returned
• Clearance items are non-returnable
• Custom order items
• Items you have already assembled
• Merchandise marked Non-Returnable on sale page

Refund Options
You can choose to have a refund returned to you by the original form of payment or receive a store credit.

Damaged/ Defective Items
Please provide photos of damage merchandise AND shipping box, SKU number and order number.

Shipping
Most standard orders are shipped within 2-3 business days. At this time, we currently do not offer expedited shipping options. Your final shipping cost and estimated delivery timeframe will be available to you at checkout. Some items may require a longer ship-out and/or delivery timeframe due to holidays and/or shipping carriers. Our standard shipping method is ground or USPS shipping.

My shipping address is different than my billing address. What do I do?

My order didn't go through but my card has been charged. How do I get my money back?

Its been 12 hours, where is my stuff?!? I needed it yesterday!

I think my package has been lost. What do I do now?